HomePublic Question ➟ 0 How do I use my Hoover SteamVac SpinScrub?

How do I use my Hoover SteamVac SpinScrub?

Hoover SteamVac SpinScrub General Use

The Hoover spotter carpet cleaner features SpinScrub technology which uses five counter-rotating brushes to gently deep clean the carpet fibers. The heated system forces hot air onto the cleaning path and aids in the cleaning process. Plus, it cleans both forward and backward for added efficiency.

Likewise, how do you use the Hoover SteamVac Widepath 6 rotating brushes? How to Operate a Hoover Steamvac Widepath

  1. Assemble the Hoover Steamvac Widepath according to the instructions in the owner’s manual.
  2. Vacuum the carpet to be cleaned with a regular vacuum cleaner, do not use the Hoover Steamvac for dry vacuuming.
  3. Fill the cleaning tank with hot tap water.
  4. Turn the switch on to engage the rotating brushes.

Also to know, how do you use a Hoover SteamVac Ultra?

The Hoover SteamVac Ultra is designed for home carpet cleaning use.

  1. Remove the cleaning solution tank.
  2. Remove the cap on the top of the tank by turning counterclockwise.
  3. Replace the tank in the machine by placing the bottom in first, and then latching the top into place.

Can you use any carpet cleaner in a Hoover?

Yes, a different brand of carpet detergent can be used. You can use it with just about any carpet shampoo on the market, not only Hoover brand.

What does clean surge mean?

Clean Surge Trigger (Extra detergent for cleaning up stains) When the Clean Surge button is depressed, it releases extra detergent into the area. This helps to remove highly stubborn stains and spots, and it’s also great for dirty high traffic carpet areas. Attachments.

How does a Hoover carpet cleaner work?

With the Hoover in position on your carpet, squeeze the trigger on its handle to release cleaning solution as you push it forward and backward slowly over the same small section. After repeating this process over the entire carpet, empty out the dirty water tank to keep your Hoover working properly.

Why is my Hoover carpet cleaner has no suction?

Empty the recovery (dirty water) tank if you experience low or no suction. A shut-off mechanism will close the suction system down when it is full. Make sure that the cap is secure on the tank when you replace it. Also, check that the tool door is closed, as a poor seal in this area can also affect suction.

How much solution do you put in a Hoover carpet cleaner?

4. Add 3 ounces per gallon to warm water in the clean water tank. For AutoMix machines, fill solution tank. Always consult owner’s manual.

Related Posts for How do I use my Hoover SteamVac SpinScrub?