In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

There **should** be at least 24 inches of clear **space** in front of a toilet or bidet. While there are no code requirements for **tub** size, minimum clear floor **space** alongside a **bathtub should** be at least 60 inches long (the length of a standard **tub**) and 30 inches wide.

Secondly, how do you measure a bathtub? **How to Measure the Dimensions of a Bathtub**

- Stand in front of the bathtub, like you were about to get in.
- Measure the distance from the left side of the bathtub to the right.
- Repeat the measuring process going from the back wall, or back of the tub, to the front.
- Measure the height of the bath tub from the floor of your bathroom to the top of the bathtub.

how deep is a standard bathtub?

14 to 17 inches

What is the size of an average bathtub?

In general, standard **dimensions** will give you a rough figure for the **size** of the **bathtub**. However, they all vary depending on the shape and type of **bathtub** you are looking to purchase. For a **typical** standard, wall-wall **bathtub**, the measures will be roughly 60 inches long, 30-32 inches wide.

### What is the deepest bathtub available?

american standard evolution bathtub at a glance allows 3-inches more water than a traditional bathtub. recessed tub with apron. dual armrests. backrest. measures 5-feet by 32-inches. requires deep soak max drain. (sold separately)

### What is the smallest space for a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

### What is a standard size soaking tub?

Typical soaking tubs range in length from 60 to 72 inches. It’s common for the average soaking tub to hold around 250 gallons of water. Soaking tubs are available as single- or two-person bathtubs.

### What size is a standard size bathtub?

Standard tubs with apron fronts are 60 inches (152 centimeters) long and 30 to 32 inches (76 to 81 centimeters) wide. The depth can be as little as 14 inches (35 centimeters) and as much as 20 inches (50 centimeters).

### Do I need a bathtub?

Bathtub Guidelines If you have multiple bathrooms, keep a tub in one of them. If you have toddlers, small children or dogs to bathe a tub is necessary. If soaking in a tub is your surefire way to relax, a tub is a must.

### What is best material for bathtub?

Bathtub Materials Plastic: Made of either fiberglass or acrylic, plastic bathtubs offer the greatest design flexibility because they can be molded into many shapes. Enameled steel: Formed steel bathtubs with a porcelain-enamel coating are the least expensive tubs.

### What is the difference between a soaking tub and regular tub?

A standard tub is generally 2-1/2 by 5 feet and approximately 14 or 15 inches deep so the water will not completely cover an adult’s body. In contrast, soaking tubs vary greatly in size. They are typically about 20 inches deep and allow water to cover most or all of the body.

### What is the most common bathtub size?

The two most common tub sizes are 60 inches long by 30 inches wide and 60 inches long by 32 inches wide. A standard rectangular-shaped tub, however, will have a smaller dimensioned bathing well, measuring 55 inches by 24 inches at the top and narrowing to 45 inches by 22 inches at the very bottom.

### What is the difference between a garden tub and a regular tub?

A standard garden tub is 42 inches wide, 60 inches long, and 24 inches deep. But they can come in any size and are often much largerâ€”as much as 70 inches wide and twice as deep as a conventional tub. “A garden tub is much larger and is often free-standing with no walls around it,” says Cummings.

### Whats a good size for a walk in shower?

The ADA suggests a minimum size of 36 inches by 36 inches for a walk-in shower, which features a bench attached to one wall for sitting. Even if you eschew the bench, 36 inches by 36 inches is a good minimum size for ease of showering.

### Is there a 58 inch bathtub?

Its very common for a standard 60″ tub to measure something like 58″ to 58.5″ from end to end with tile. The backer board and tile are built out from the walls so that water drops down into the tub and not behind the tub. Long tubs are 66″ or even longer.

### Are all baths the same size?

Standard bath size As it is commonly accepted that the standard bath width is 700mm, a wide bath is considered to be any bath with a diameter of 800mm and above. Large baths with dimensions over 1800mm in length and over 800mm wide tend to be freestanding baths.

### How much does it cost to put in a bathtub?

The average cost to install a bathtub is $3,358, but can range from $1,057 and $5,659, depending on the type of tub and modifications needed. The average cost of the tub itself ranges from $200 to $2,000 or more.

##### Related Posts for What is the size of bath tub?

- How do you take care of a giant amaryllis?
- What does it mean when you see a damselfly?
- How do you try a lipstick tester?
- Where is the air gap on my sink?
- Can I use pool salt in water softener?
- What is MSB insurance?
- Does CREP protect clean shoes?
- What is the purpose of Las Fallas?
- What alcohol percentage is lambrini?
- Where is the debit side of an account?